Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The purpose of the Checkbook Deposit Record View is to assign 'Payment Receipts' that make up a bank deposit. From here, users can create a new deposit, assign one or more payment receipts to it, remove payments receipts prior to posting, or delete the deposit. Deleting a deposit transaction does not delete the payment receipts that were assigned to it, it just puts them back in a status of open. When Checkbook Deposits are posted, the Checkbook Balances are updated. Deposits only have the potential of making a 'Currency Gain/Loss' Journal Entry (because the journal entry to record the receipt of funds was made from the Receipt). The 'Currency Gain/Loss' Journal Entry is the summarized total from each individual Receipt's Gain/Loss amount. A Deposit will have a Currency Gain/Loss if one or more of the Receipts are not in the 'Home Currency' AND the exchange rate for the Receipt Date is different than the exchange rate for the Deposit Date. The Currency Gain/Loss Journal Entry is always created as a manual journal entry since it must be in the 'Home Currency'.

Software Version: YYYY.MM.DD and newer

Table of Contents
typeflat

Page Header

...

When a Deposit is deleted, all tagged Receipts are untagged (released) so they can be used on a different deposit.

...

For Checkbook Deposits, this icon is only visible for 'Posted' Deposits that resulted in a currency gain/loss journal entry.

...

Home Tab 

...

A single-select combo box to select the Checkbook the deposit is being made to. Once a value has been selected, the contents of the grid will be populated with all the un-deposited 'Payment Receipts' for the selected Checkbook. This field is editable when the Status is "New". However, if the Checkbook is changed, all tagged Payment Receipts will be un-selected and the contents of the grid will be refreshed to show un-deposited 'Payment Receipts' for the newly selected Checkbook. This defaults to blank but is required to Approve or Post. If missing, the message "Checkbook is required." will be displayed on Save.

This lookup contains a blank value, the current assigned value, and a list of all the 'Active' Checkbooks, sorted by Checkbook, displayed as:

  • If the Checkbook's Currency is the 'Home Currency' then [Checkbook]
  • If the Checkbook's Currency is NOT the 'Home Currency' then [Checkbook] +([Checkbook Currency])

Linked Database Field: ERPx_MFCheckbookTransaction.CheckbookSK

...

A text box to enter a short comment pertaining to the Deposit. This field is is always editable (even after the transaction is posted) and is not required. If a Comment is entered, it must be <= 60 characters. 

Linked Database Field: ERPx_MFCheckbookTransaction.Comment

...

The purpose of the Checkbook Deposit Record View is to assign 'Payment Receipts' that make up a bank deposit. From here, users can create a new deposit, assign one or more payment receipts to it, remove payments receipts prior to posting, or delete the deposit. Deleting a deposit transaction does not delete the payment receipts that were assigned to it, it just puts them back in a status of open. When Checkbook Deposits are posted, the Checkbook Balances are updated. Deposits only have the potential of making a 'Currency Gain/Loss' Journal Entry (because the journal entry to record the receipt of funds was made from the Receipt). The 'Currency Gain/Loss' Journal Entry is the summarized total from each individual Receipt's Gain/Loss amount. A Deposit will have a Currency Gain/Loss if one or more of the Receipts are not in the 'Home Currency' AND the exchange rate for the Receipt Date is different than the exchange rate for the Deposit Date. The Currency Gain/Loss Journal Entry is always created as a manual journal entry since it must be in the 'Home Currency'.

Software Version: YYYY.MM.DD and newer

Table of Contents
typeflat

Page Header

Toolbar IconsDescription
Delete

Insert excerpt
Delete RV - Global
Delete RV - Global
nopaneltrue

When a Deposit is deleted, all tagged Receipts are untagged (released) so they can be used on a different deposit.

Grid Layout
Insert excerpt
Grid Layout
Grid Layout
nopaneltrue
Help
Insert excerpt
Help - Global Icon
Help - Global Icon
nopaneltrue
Journal Details

Insert excerpt
Journal Details - Icon
Journal Details - Icon
nopaneltrue

For Checkbook Deposits, this icon is only visible for 'Posted' Deposits that resulted in a currency gain/loss journal entry.

New
Insert excerpt
New - Global
New - Global
nopaneltrue
Notes
Insert excerpt
Notes - Global
Notes - Global
nopaneltrue
Print
Insert excerpt
Print - Global
Print - Global
nopaneltrue
Save
Insert excerpt
Save - Global
Save - Global
nopaneltrue

Home Tab 

FieldsDescription
Checkbook

A single-select combo box to select the Checkbook the deposit is being made to. Once a value has been selected, the contents of the grid will be populated with all the un-deposited 'Payment Receipts' for the selected Checkbook. This field is editable when the Status is "New". However, if the Checkbook is changed, all tagged Payment Receipts will be un-selected and the contents of the grid will be refreshed to show un-deposited 'Payment Receipts' for the newly selected Checkbook. This defaults to blank but is required to Approve or Post. If missing, the message "Checkbook is required." will be displayed on Save.

This lookup contains a blank value, the current assigned value, and a list of all the 'Active' Checkbooks, sorted by Checkbook, displayed as:

  • If the Checkbook's Currency is the 'Home Currency' then [Checkbook]
  • If the Checkbook's Currency is NOT the 'Home Currency' then [Checkbook] +([Checkbook Currency])

Linked Database Field: ERPx_MFCheckbookTransaction.CheckbookSK

Comment

A text box to enter a short comment pertaining to the Deposit. This field is is always editable (even after the transaction is posted) and is not required. If a Comment is entered, it must be <= 60 characters. 

Linked Database Field: ERPx_MFCheckbookTransaction.Comment

Deposit Amount

A non-editable text box to show the total amount of the deposit, in the checkbook's currency, displayed in the currency format. If the Checkbook is in a foreign currency, then the Currency ID will also be displayed. This defaults to 0.00 but updates as Payment Receipts are selected and/or un-selected. The Deposit Amount must be > 0.00 to Approve or Post. If not, the message "The Deposit Amount must be > 0.00." will appear on Save.  

In multi-currency transactions, the 'Deposit Amount' is calculated by converting the 'Receipt Amount' for each "Included" Receipt from the 'Receipt Currency' to the currency of the deposit Checkbook. 

This field is not linked to a Database Field.

Deposit Date

A date field to enter the date the Deposit posted to, or should post to, the bank account. This defaults to the current date and is required to Approve and/or Post. If not, the message "Deposit Date is required." will be displayed. This field is only editable while the transaction Status is "New". When the transaction status is changed to Approve and/or Ready to Post, this date will push to the 'GL Date' property if the 'GL Date' is blank. 

Linked Database Field: ERPx_MFCheckbookTransaction.TransactionDate

Reference

A text box to enter a 3rd party reference number for the Deposit. This field is is always editable (even after the transaction is posted) and is not required. If a Reference is entered, it must be <= 60 characters. 

Linked Database Field: ERPx_MFCheckbookTransaction.Reference

Status

Insert excerpt
Status - RV
Status - RV
nopaneltrue

Linked Database Field: ERPx_MFCheckbookTransaction.TransactionStatusSK

Properties Tab

The fields sorted at the bottom of this section, prefixed with "MC:" are only visible on multi-currency deposit transactions.

FieldsDescription
Checkbook Currency

A non-editable text box that displays the Currency ID of the Checkbook.

Linked Database Field: ERPx_MFCheckbook.CurrencySK.

CheckbookSK

A non-editable text box that displays the SK value of the Checkbook that is assigned to the Transaction.

Linked Database Field: ERPx_MFCheckbookTransaction.CheckbookSK.

Created

Insert excerpt
Created (Date & Time) - RV
Created (Date & Time) - RV
nopaneltrue

Linked Database Field: ERPx_MFCheckbookTransaction.CreatedDate

Created By

Insert excerpt
Created By- RV
Created By- RV
nopaneltrue

Linked Database Field: ERPx_MFCheckbookTransaction.CreatedBy

GL Date

Insert excerpt
GL Date - RV
GL Date - RV
nopaneltrue
 ERPx_MFCheckbookTransaction.GLDate

Last Updated

Insert excerpt
Last Updated (Date & Time) - RV
Last Updated (Date & Time) - RV
nopaneltrue

Linked Database Field: ERPx_MFCheckbookTransaction.LastUpdated

Last Updated By

Insert excerpt
Last Updated By- RV
Last Updated By- RV
nopaneltrue

Linked Database Field: ERPx_MFCheckbookTransaction.LastUser

Transaction HeaderSK

A non-editable text box that displays the SK value of the Transaction ID.

Linked Database Field: ERPx_MFCheckbookTransaction.CheckbookTransactionSK

Transaction ID

A non-editable text box that displays the Transaction ID.

Linked Database Field: ERPx_MFCheckbookTransaction.TransactionID

MC: Currency Conversion

This field is used to convert the transaction total 'Deposit Amount' to the 'Home Currency' amount. This is a non-editable text box that displays the currencies on the 'Exchange Table' being used to convert the 'Deposit Amount' to the 'Home Currency' amount for the Checkbook Transaction Inquiry. This is formatted as: "From [Checkbook Currency] to [Home Currency]". This is required when the Deposit Checkbook's currency is not in the 'Home Currency'.

MC: Exchange Date

This field is used to convert the transaction total 'Deposit Amount' to the 'Home Currency' amount. This is a non-editable text box to show the date range of the 'Rate' (Exchange Rate) on the 'Exchange Table' being used to convert the 'Deposit Amount' to the 'Home Currency' amount for the Checkbook Transaction InquiryThis is required when the Deposit Checkbook's currency is not in the 'Home Currency'.

The 'Rate' is looked-up using the 'Deposit Date', not the 'GL Date'. This field is only visible, and required to Approve and/or Post, when the Deposit Checkbook's currency is NOT in the 'Home Currency'. This is displayed as: From [Rate From] to [Rate to]. For example, "From 10/01/19 to 10/07/19".

This value is a looked up in real time from the Exchange Table until the transaction Status is set to Approved and/or Ready to Post. When the transaction Status is set to Approved and/or Ready to Post, the value is updated and written to the database. For posted transactions, this is the value that was existed when the transaction posted.

MC: Exchange Rate

This field is used to convert the transaction total 'Deposit Amount' to the 'Home Currency' amount. This is a non-editable text box to show the 'Calculation Method' and 'Rate' being used to convert the 'Deposit Amount' to the 'Home Currency' amount for the Checkbook Transaction Inquiry. This is required when the Deposit Checkbook's currency is not in the 'Home Currency'. It is set as follows:

  • If the 'From Currency' on the Exchange Table matches the Deposit Checkbook currency, then the 'Calculation Method' will default from the 'Calculation Method' on the Exchange Table.
  • If the 'From Currency' on the Exchange Table matches the 'Home Currency', the 'Calculation Method' will be the opposite as it is on the Exchange Table.

This is formatted as: [Calculation Method] by [Rate]. For Example, "Multiply by 1.0250" or "Divide by 1.0250".

This value is a looked up in real time from the Exchange Table until the transaction Status is set to Approved and/or Ready to Post. When the transaction Status is set to Approved and/or Ready to Post, the value is updated and written to the database. For posted transactions, this is the value that was existed when the transaction posted.

MC: Exchange Table

This field is used to convert the transaction total 'Deposit Amount' to the 'Home Currency' amount. This is a non-editable text box that displays the 'Exchange Table ID' used to convert the 'Deposit Amount' to the 'Home Currency' amount for the Checkbook Transaction InquiryThis is required when the Deposit Checkbook's currency is not in the 'Home Currency'.

This is assigned as the first Exchange Table containing both the 'Home Currency' and the foreign currency assigned to the deposit checkbook, with a valid 'Rate' (exchange rate) for the 'Deposit Date'. If there are no Rates that cover the 'Deposit Date' then the last Rate will be used. If there are no Exchange Tables containing both the 'Home Currency' and the foreign currency then this will be blank and the message "A valid exchange does not exist between [DepositCheckbookCurrencyID] and [HomeCurrencyID]." will be displayed on Save after the Status is changed to Approve and/or Ready to Post.

MC: Home Currency Deposit Amount

This field is used to convert the transaction total 'Deposit Amount' to the 'Home Currency' amount. This is a non-editable text box that displays the Deposit Amount converted to the Home Currency. 

Page Detail

Open Payment Receipts Grid

The purpose of the Open Payment Receipts grid is to show all the "Posted" Payment Receipts that have not been deposited and that are not currently tagged on another deposit. For un-posted Deposits, the grid contains all the "Posted" Payment Receipts, received against the Deposit Checkbook, that have not been assigned to another deposit. For posted Deposits, the grid contains all the Payment Receipts that were included on the Deposit. Fields prefixed with "MC: " are sorted at the bottom of the list and are only applicable to multi-currency transactions. The column headers in the interface do not include the MC: prefix. This page does not support paging, it is designed to show all un-posted receipts in a single list.

Toolbar IconsDescription
Excel
Insert excerpt
Excel - Global
Excel - Global
nopaneltrue

Include Transactions

Insert excerpt
Include Transactions (Multi-Select) - RV
Include Transactions (Multi-Select) - RV
nopaneltrue

Selecting a receipt adds it to the deposit, updates the 'Deposit Amount' column in the grid, and updates the 'Deposit Amount' in the header.


Remove Transactions

Insert excerpt
Remove Transactions (Multi-Select) - RV
Remove Transactions (Multi-Select) - RV
nopaneltrue

Removing (un-selecting) a receipt removes it from the deposit, clears it from the 'Deposit Amount' column in the grid, and removes it from the 'Deposit Amount' in the header.


FieldsDescription
Checkbox
Insert excerpt
Checkbox (Tag)- RV
Checkbox (Tag)- RV
nopaneltrue

Deposit Amount

Displays the amount that the Payment Receipt will add to the deposit, in the checkbook's currency, displayed in the

currency format. If the Checkbook is in a foreign currency, then the Currency ID will also be displayed. This

checkbook currency format. The 'Deposit Amount' defaults to 0.00

but updates as Payment Receipts are selected and/or un-selected. The Deposit Amount must be > 0.00 to Approve or Post. If not, the message "The Deposit Amount must be > 0.00." will appear on Save.  

In multi-currency transactions, the 'Deposit Amount' is calculated by converting the 'Receipt Amount' for each "Included" Receipt from the 'Receipt Currency' to the currency of the deposit Checkbook. 

This field is not linked to a Database Field.

Deposit Date

A date field to enter the date the Deposit posted to, or should post to, the bank account. This defaults to the current date and is required to Approve and/or Post. If not, the message "Deposit Date is required." will be displayed. This field is only editable while the transaction Status is "New". When the transaction status is changed to Approve and/or Ready to Post, this date will push to the 'GL Date' property if the 'GL Date' is blank. 

Linked Database Field: ERPx_MFCheckbookTransaction.TransactionDate

Reference

A text box to enter a 3rd party reference number for the Deposit. This field is is always editable (even after the transaction is posted) and is not required. If a Reference is entered, it must be <= 60 characters. 

Linked Database Field: ERPx_MFCheckbookTransaction.Reference

Status Insert excerptStatus - RVStatus - RVnopaneltrue

and is updated for each selected record. This column has a total at the bottom.

If the 'Receipt Currency' matches the Checkbook's Currency, the 'Deposit Amount' will be the 'Receipt Amount'. If the 'Receipt Currency' does not match the Checkbook's Currency, the 'Deposit Amount' will be the 'Receipt Amount' converted to the Checkbook's Currency. The deposit Amount is calculated as either:

  • [Receipt Amount] * [Deposit Exchange Rate] - If the 'Exchange Rate Calculation Method' = "Multiply"
  • [Receipt Amount] / [Deposit Exchange Rate] - If the 'Exchange Rate Calculation Method' = "Divide" 

Linked Database Field: ERPx_MFCheckbookDetail.DebitAmount


IncludedA checkbox that identifies if the Payment Receipt is included on the Deposit. This value is updated from the 'Include Transactions' and the 'Remove Transactions' icon on the grid toolbar.
Payment #

Displays the 'Payment #' from the 'Payment Receipt' (e.g. for Receipt Types of "Check", this represents the Check #). This field is not editable from the grid but is editable from the record view of the Payment Receipt transaction by clicking on the Trans. # hyperlink, even after the transaction is posted.

Linked Database Field: ERPx_#####.#####.


Receipt Amount

Displays the amount of the 'Payment Receipt' in the 'Currency' and currency format it was received in. This column has a total at the bottom.

Linked Database Field: ERPx_

MFCheckbookTransaction.TransactionStatusSK

Properties Tab

The fields sorted at the bottom of this section, prefixed with "MC:" are only visible on multi-currency deposit transactions.

FieldsDescriptionCheckbook CurrencyA non-editable text box that displays the

APTransactionHeader.ExtendedAmount  ERPx_ARTransactionHeader.ExtendedAmount


Receipt Currency

Displays the Currency ID of the

Checkbook

'Payment Receipt'.

Linked Database Field: ERPx_APTransactionHeader.CurrencySK  ERPx_

MFCheckbook

ARTransactionHeader.CurrencySK

.

CheckbookSKA non-editable text box that displays the SK value of the Checkbook that is assigned to the Transaction

Receipt Date

Displays the 'Receipt Date' from the Payment Receipt.

Linked Database Field: ERPx_

MFCheckbookTransaction

APTransactionHeader.

CheckbookSK

TransactionDate  ERPx_ARTransactionHeader.TransactionDate

Created Insert excerptCreated (Date & Time) - RVCreated (Date & Time) - RVnopaneltrue

Receipt TypeDisplays the 'Receipt Type' of the Payment Receipt. The options available in this field include all the values in the MFCashReceiptType Enumeration Class. 

Linked Database Field: ERPx_

MFCheckbookTransaction.CreatedDateCreated By Insert excerptCreated By- RVCreated By- RVnopaneltrue

Linked Database Field: ERPx_MFCheckbookTransaction.CreatedBy

GL Date Insert excerptGL Date - RVGL Date - RVnopaneltrue ERPx_MFCheckbookTransaction.GLDateLast Updated Insert excerptLast Updated (Date & Time) - RVLast Updated (Date & Time) - RVnopaneltrue

Linked Database Field: ERPx_MFCheckbookTransaction.LastUpdated

Last Updated By Insert excerptLast Updated By- RVLast Updated By- RVnopaneltrue

Linked Database Field: ERPx_MFCheckbookTransaction.LastUser

Transaction HeaderSK

APTransactionHeader.CashReceiptType  ERPx_ARTransactionHeader.CashReceiptTypeEN


Receipt SourceIdentifies which Functional Area the 'Payment Receipt' was posted from. Payment Receipts from customers will have a Source of "Sales". Payment Receipts from Fishermen or Loans will have a Source of "Fisherman Accounting".
Received From

Displays the name of the account that the Payment Receipt was received from. Most Payment Receipts are from customers, but they can also be from Fishermen and Loan Accounts.

Linked Database Field for A/R Payment Receipts: ERPx_ARTransactionHeader.CustomerSK

Linked Database Field for A/P Payment Receipts: ERPx_APTransactionHeader.VendorSK


Trans. #

Insert excerpt
Trans. ID - List View/Inquiry Field
Trans. ID - List View/Inquiry Field
nopaneltrue
 ERPx_APTransactionHeader.  ERPx_ARTransactionHeader.


MC: Deposit Currency

A non-editable text box that displays the

SK value of the Transaction ID.

Linked Database Field: ERPx_MFCheckbookTransaction.CheckbookTransactionSK

Transaction IDA non-editable text box that displays the Transaction ID

currency that the receipt will be deposited in. This will always be the Currency ID from the Deposit Checkbook.

Linked Database Field: ERPx_

MFCheckbookTransaction

MFCheckbook.

TransactionID

CurrencySK


MC: Deposit Currency
Conversion
Gain / Loss

A non-editable text box

that displays the currencies on the 'Exchange Table' being used to convert the 'Deposit Amount' to the 'Home Currency' amount for the Checkbook Transaction Inquiry. This is formatted as: "From [Checkbook Currency] to [Home Currency]". This is required when the Deposit Checkbook's currency is not in the 'Home Currency'.MC: Exchange Rate

A non-editable text box to show the 'Calculation Method' and 'Rate' being used to convert the 'Deposit Amount' to the 'Home Currency' amount for the Checkbook Transaction Inquiry. This is required when the Deposit Checkbook's currency is not in the 'Home Currency'. It is set as follows:

  • If the 'From Currency' on the Exchange Table matches the Adjustment currency, then the 'Calculation Method' will default from the 'Calculation Method' on the Exchange Table.
  • If the 'From Currency' on the Exchange Table matches the 'Home Currency', the 'Calculation Method' will be the opposite as it is on the Exchange Table.

This is formatted as: [Calculation Method] by [Rate]. For Example, "Multiply by 1.0250" or "Divide by 1.0250".

MC: Exchange Rate DateA non

to show the calculated amount of the Currency Gain/Loss. This defaults to 0.00 and is updated for each 'Payment Receipt' added to the Deposit, where the 'Receipt Currency' does not match the Deposit Checkbook's Currency, calculated as ([Receipt Amount] * [Deposit Exchange Rate]) - ([Receipt Amount] * [Receipt Exchange Rate]). This field will be 0.00 for all 'Payment Receipts' that were posted in the Deposit Checkbook's Currency. This column has a total at the bottom.

  • If the column total is positive, then the Deposit will result in a Currency Gain and a journal entry will be created when the Deposit is posted. 
  • If the column total is negative, then the Deposit will result in a Currency Loss and a journal entry will be created when the Deposit is posted.  
  • If the column total is 0.00 then there is no Currency Gain or Loss and the Deposit will not create a journal entry.

MC: Deposit Amt: Currency Conversion

This is used to convert the 'Receipt Amount' to the 'Deposit Amount' for each Receipt that is "Included" on the Deposit. This is a non-editable text box that displays the currencies on the 'Exchange Table' being used for the conversion. This is formatted as: "From [Receipt Currency] to [Deposit Checkbook's Currency]".

This is required for all "Included" Receipts where the 'Receipt Currency' is different from the Deposit Checkbook's Currency.


MC: Deposit Amt: Exchange Date

This is used to convert the 'Receipt Amount' to the 'Deposit Amount' for each Receipt that is "Included" on the Deposit. This is a non-editable text box to show the date range of the 'Rate' (Exchange Rate) on the 'Exchange Table' being used

to convert the 'Deposit Amount' to the 'Home Currency' amount for the Checkbook Transaction Inquiry. This is required when

for the conversion. This is required for all "Included" Receipts where the 'Receipt Currency' is different from the Deposit Checkbook's

currency is not in the 'Home

Currency

'

.

The 'Rate' is looked-up using the 'Deposit Date', not the 'GL Date'. This

field is only visible, and required to Approve and/or Post, when the Checkbook's currency is NOT in the 'Home Currency'. This is displayed as: From [Rate From] to [Rate to]. For example, "From 10/01/19 to 10/07/19".MC: Exchange Table

A non-editable text box that displays the 'Exchange Table ID' used to convert the 'Deposit Amount' to the 'Home Currency' amount for the Checkbook Transaction InquiryThis is required when the Deposit Checkbook's currency is not in the 'Home Currency'.

This is assigned as the first Exchange Table containing both the 'Home Currency' and the foreign currency assigned to the deposit checkbook, with a valid 'Rate' (exchange rate) for the 'Deposit Date'. If there are no Rates that cover the 'Deposit Date' then the last Rate will be used. If there are no Exchange Tables containing both the 'Home Currency' and the foreign currency then this will be blank and the message "A valid exchange does not exist between [DepositCheckbookCurrencyID] and [HomeCurrencyID]." will be displayed on Save after the Status is changed to Approve and/or Ready to Post.

Page Detail

Open Payment Receipts Grid

The purpose of the Open Payment Receipts grid is to show all the "Posted" Payment Receipts that have not been deposited and that are not currently tagged on another deposit. For un-posted Deposits, the grid contains all the "Posted" Payment Receipts, received against the Deposit Checkbook, that have not been assigned to another deposit. For posted Deposits, the grid contains all the Payment Receipts that were included on the Deposit. Fields prefixed with "MC: " are sorted at the bottom of the list and are only applicable to multi-currency transactions. The column headers in the interface do not include the MC: prefix. This page does not support paging, it is designed to show all un-posted receipts in a single list.

Selecting a receipt adds it to the deposit, updates the 'Deposit Amount' column in the grid, and updates the 'Deposit Amount' in the header.

Removing (un-selecting) a receipt removes it from the deposit, clears it from the 'Deposit Amount' column in the grid, and removes it from the 'Deposit Amount' in the header.

 ERPx_APTransactionHeader.  ERPx_ARTransactionHeader.
Toolbar IconsDescription
Excel
Insert excerpt
Excel - GlobalExcel - Global
nopaneltrue
Include Transactions
Insert excerpt
Include Transactions (Multi-Select) - RVInclude Transactions (Multi-Select) - RV
nopaneltrue
Remove Transactions
Insert excerpt
Remove Transactions (Multi-Select) - RVRemove Transactions (Multi-Select) - RV
nopaneltrue
FieldsDescription
Checkbox
Insert excerpt
Checkbox (Tag)- RVCheckbox (Tag)- RV
nopaneltrue
Deposit Amount

Displays the amount that the Payment Receipt will add to the deposit, in the checkbook's currency, displayed in the checkbook currency format. The 'Deposit Amount' defaults to 0.00 and is updated for each selected record. This column has a total at the bottom.

If the 'Receipt Currency' matches the Checkbook's Currency, the 'Deposit Amount' will be the 'Receipt Amount'. If the 'Receipt Currency' does not match the Checkbook's Currency, the 'Deposit Amount' will be the 'Receipt Amount' converted to the Checkbook's Currency. The deposit Amount is calculated as either:

  • [Receipt Amount] * [Deposit Exchange Rate] - If the 'Exchange Rate Calculation Method' = "Multiply"
  • [Receipt Amount] / [Deposit Exchange Rate] - If the 'Exchange Rate Calculation Method' = "Divide" 

Linked Database Field: ERPx_MFCheckbookDetail.DebitAmount

IncludedA checkbox that identifies if the Payment Receipt is included on the Deposit. This value is updated from the 'Include Transactions' and the 'Remove Transactions' icon on the grid toolbar.
Payment #

Displays the 'Payment #' from the 'Payment Receipt' (e.g. for Receipt Types of "Check", this represents the Check #). This field is not editable from the grid but is editable from the record view of the Payment Receipt transaction by clicking on the Trans. # hyperlink, even after the transaction is posted.

Linked Database Field: ERPx_#####.#####.

Receipt Amount

Displays the amount of the 'Payment Receipt' in the 'Currency' and currency format it was received in. This column has a total at the bottom.

Linked Database Field: ERPx_APTransactionHeader.ExtendedAmount  ERPx_ARTransactionHeader.ExtendedAmount

Receipt Currency

Displays the Currency ID of the 'Payment Receipt'.

Linked Database Field: ERPx_APTransactionHeader.CurrencySK  ERPx_ARTransactionHeader.CurrencySK

Receipt Date

Displays the 'Receipt Date' from the Payment Receipt.

Linked Database Field: ERPx_APTransactionHeader.TransactionDate  ERPx_ARTransactionHeader.TransactionDate

Receipt TypeDisplays the 'Receipt Type' of the Payment Receipt. The options available in this field include all the values in the MFCashReceiptType Enumeration Class. 

Linked Database Field: ERPx_APTransactionHeader.CashReceiptType  ERPx_ARTransactionHeader.CashReceiptTypeEN

Receipt SourceIdentifies which Functional Area the 'Payment Receipt' was posted from. Payment Receipts from customers will have a Source of "Sales". Payment Receipts from Fishermen or Loans will have a Source of "Fisherman Accounting".
Received From

Displays the name of the account that the Payment Receipt was received from. Most Payment Receipts are from customers, but they can also be from Fishermen and Loan Accounts.

Linked Database Field for A/R Payment Receipts: ERPx_ARTransactionHeader.CustomerSK

Linked Database Field for A/P Payment Receipts: ERPx_APTransactionHeader.VendorSK

Trans. #
Insert excerpt
Trans. ID - List View/Inquiry FieldTrans. ID - List View/Inquiry Field
nopaneltrue
MC: Deposit Currency

A non-editable text box that displays the currency that the receipt will be deposited in. This will always be the Currency ID from the Deposit Checkbook.

Linked Database Field: ERPx_MFCheckbook.CurrencySK

MC: Deposit Currency Gain / Loss

A non-editable text box to show the calculated amount of the Currency Gain/Loss. This defaults to 0.00 and is updated for each 'Payment Receipt' added to the Deposit, where the 'Receipt Currency' does not match the Deposit Checkbook's Currency, calculated as ([Receipt Amount] * [Deposit Exchange Rate]) - ([Receipt Amount] * [Receipt Exchange Rate]). This field will be 0.00 for all 'Payment Receipts' that were posted in the Deposit Checkbook's Currency. This column has a total at the bottom.

  • If the column total is positive, then the Deposit will result in a Currency Gain and a journal entry will be created when the Deposit is posted. 
  • If the column total is negative, then the Deposit will result in a Currency Loss and a journal entry will be created when the Deposit is posted.  
  • If the column total is 0.00 then there is no Currency Gain or Loss and the Deposit will not create a journal entry.
MC: Deposit Exchange Rate

A non-editable text box that displays the 'Rate' (exchange rate) that applies to the 'Deposit Date' from the from the 'Exchange Table' assigned to the 'Payment Receipt'. This is set to 1.00 for all 'Payment Receipts' where the 'Receipt Currency' matches the Deposit Checkbook's Currency.

Linked Database Field: ERPx_MFCheckbookDetail.ExchangeRate

MC: Exchange Calc. Method

A non-editable text box to show the 'Calculation Method' being used to convert each 'Payment Receipt' currency (the 'From Currency') to the Deposit's Currency (the 'To Currency'). This will either be "Multiply" or "Divide" and is set as follows:

  • If the 'Receipt Currency' matches the Deposit Checkbook's Currency then this will the set to "Multiply".
  • If the 'From Currency' on the Exchange Table matches the 'Payment Receipt' Currency and the 'To Currency' on the Exchange Table matches the Checkbook's Currency, the 'Calculation Method' will default from the 'Calculation Method' on the Exchange Table.
  • If the 'From Currency' on the Exchange Table matches the Checkbooks Currency and the 'To Currency' on the Exchange Table matches the 'Payment Receipt' Currency, the 'Calculation Method' will be the opposite as it is on the Exchange Table.

This is a looked-up value. Linked Database Field: ERPx_MFCheckbookDetail.ExchangeRateCalculationMethodEN

MC: Exchange Table

A non-editable text box that displays the 'Exchange Table ID' being used to convert between the Deposit Checkbook's Currency and the Receipt Currency. This field will be blank for all 'Payment Receipts' that are in the same currency as the Checkbook they are being deposited into and for 'Payment Receipts' that have been selected for the deposit. This field is required for all 'Payment Receipts' that are not in the same currency as the Checkbook they are being deposited into.

This value is auto-assigned and not editable by users. It is assigned as the first Exchange Table containing both the 'Receipt Currency' and the 'Deposit Currency' with a valid 'Rate' (exchange rate) for the Deposit Date. If there are no Rates that cover the Deposit Date then the last Rate will be used. If there are no Exchange Tables containing both the Receipt Currency and the Deposit Currency then this will be blank and the message "A valid exchange does not exist between [ReceiptCurrencyID] and [DepositCurrencyID]." will be displayed on Save after the Status is changed to Approve and/or Ready to Post. 

Linked Database Field: ERPx_MFCheckbookDetail.ExchangeSK

MC: Receipt Exchange Rate

A non-editable text box that displays the 'Rate' (exchange rate) that applies to the 'Receipt Date' from the from the 'Exchange Table' assigned to the 'Payment Receipt'. This is set to 1.00 for all 'Payment Receipts' where the 'Receipt Currency' matches the Deposit Checkbook's Currency.

Linked Database Field: ERPx_MFCheckbookDetail.ReceiptExchangeRate

is displayed as: From [Rate From] to [Rate to]. For example, "From 10/01/19 to 10/07/19".

This value is a looked up in real time from the Exchange Table until the transaction Status is set to Approved and/or Ready to Post. When the transaction Status is set to Approved and/or Ready to Post, the value is updated and written to the database. For posted transactions, this is the value that was existed when the transaction posted.


MC: Deposit Amt: Exchange Rate

This is used to convert the 'Receipt Amount' to the 'Deposit Amount' for each Receipt that is "Included" on the Deposit. This is a non-editable text box to show the 'Calculation Method' and 'Rate' being used for the conversion. This is required for all "Included" Receipts where the 'Receipt Currency' is different from the Deposit Checkbook's Currency. It is set as follows:

  • If the 'From Currency' on the Exchange Table matches the 'Receipt Currency', then the 'Calculation Method' will default from the 'Calculation Method' on the Exchange Table.
  • If the 'From Currency' on the Exchange Table matches the 'Home Currency', the 'Calculation Method' will be the opposite as it is on the Exchange Table.

This is formatted as: [Calculation Method] by [Rate]. For Example, "Multiply by 1.0250" or "Divide by 1.0250".

This value is a looked up in real time from the Exchange Table until the transaction Status is set to Approved and/or Ready to Post. When the transaction Status is set to Approved and/or Ready to Post, the value is updated and written to the database. For posted transactions, this is the value that was existed when the transaction posted.


MC: Deposit Amt: Exchange Table

This is used to convert the 'Receipt Amount' to the 'Deposit Amount' for each Receipt that is "Included" on the Deposit. This is a non-editable text box that displays the 'Exchange Table ID' used for the conversion. This is required for all "Included" Receipts where the 'Receipt Currency' is different from the Deposit Checkbook's Currency.

This is assigned as the first Exchange Table containing both the 'Receipt Currency' and the currency assigned to the Deposit Checkbook, with a valid 'Rate' (exchange rate) for the 'Deposit Date'. If there are no Rates that cover the 'Deposit Date' then the last Rate will be used. If there are no Exchange Tables containing both the 'Receipt Currency' and the currency assigned to the Deposit Checkbook then this will be blank and the message "A valid exchange does not exist between [DepositCheckbookCurrencyID] and [ReceiptCurrencyID]." will be displayed on Save after the Status is changed to Approve and/or Ready to Post.


MC: Gain/Loss: Currency Conversion

This is used to calculate the Currency Gain/Loss for each Receipt that is NOT in the 'Home Currency'. This is a non-editable text box that displays the currencies on the 'Exchange Table' that was assigned to the Payment Receipt (when it posted), to convert the 'Receipt Currency' to the 'Home Currency'. This is formatted as: "From [Receipt Currency] to [Home Currency]".

This is required for all Receipts where the 'Receipt Currency' is not in the 'Home Currency'.


MC: Gain/Loss: Currency Exchange Table

This is used to calculate the Currency Gain/Loss for each Receipt that is NOT in the 'Home Currency'. This is a non-editable text box that displays the 'Exchange Table ID' that was assigned to the Payment Receipt (when it posted), to convert the 'Receipt Currency' to the 'Home Currency'. This is required for all Receipts where the 'Receipt Currency' is not in the 'Home Currency'.


MC: Gain/Loss: Deposit Amount

This is used to calculate the Currency Gain/Loss for each Receipt that is NOT in the 'Home Currency'. This is a non editable field that displays the 'Receipt Amount' converted to the 'Home Currency' based on the exchange rate for the Deposit Date. This is formatted in the Home Currency format.

  • If the 'Gain/Loss: Deposit Amount' > 'Gain/Loss: Receipt Amount' then the receipt on the deposit will result in a currency gain.
  • If the 'Gain/Loss: Deposit Amount' < 'Gain/Loss: Receipt Amount' then the receipt on the deposit will result in a currency loss. 

MC: Gain/Loss: Deposit Exch. Date

This is used to calculate the Currency Gain/Loss for each Receipt that is NOT in the 'Home Currency'. This is a non-editable text box to show the date range of the 'Rate' (Exchange Rate) on the 'Exchange Table' being used for the conversion. This is required for all "Included" Receipts that are not in the 'Home Currency'.

The 'Rate' is looked-up using the 'Deposit Date', not the 'GL Date'. This is displayed as: From [Rate From] to [Rate to]. For example, "From 10/01/19 to 10/07/19".

This value is a looked up in real time from the Exchange Table until the transaction Status is set to Approved and/or Ready to Post. When the transaction Status is set to Approved and/or Ready to Post, the value is updated and written to the database. For posted transactions, this is the value that was existed when the transaction posted.


MC: Gain/Loss: Deposit Exch. Rate

This is used to calculate the Currency Gain/Loss for each Receipt that is NOT in the 'Home Currency'. This is a non-editable text box to show the 'Calculation Method' and 'Rate' being used for the conversion. This is required for all "Included" Receipts that are not in the 'Home Currency'. It is set as follows:

  • If the 'From Currency' on the Exchange Table matches the 'Home Currency', then the 'Calculation Method' will default from the 'Calculation Method' on the Exchange Table.
  • If the 'From Currency' on the Exchange Table matches the 'Receipt Currency', the 'Calculation Method' will be the opposite as it is on the Exchange Table.

This is formatted as: [Calculation Method] by [Rate]. For Example, "Multiply by 1.0250" or "Divide by 1.0250".

This value is a looked up in real time from the Exchange Table until the transaction Status is set to Approved and/or Ready to Post. When the transaction Status is set to Approved and/or Ready to Post, the value is updated and written to the database. For posted transactions, this is the value that was existed when the transaction posted.


MC: Gain/Loss: Receipt Amount

This is used to calculate the Currency Gain/Loss for each Receipt that is NOT in the 'Home Currency'. This is a non editable field that displays the 'Receipt Amount' converted to the 'Home Currency' using the exchange rate the Receipt posted with. This is formatted in the Home Currency format.

  • If the 'Gain/Loss: Receipt Amount' < 'Gain/Loss: Deposit Amount' then the receipt on the deposit will result in a currency gain.
  • If the 'Gain/Loss: Receipt Amount' > 'Gain/Loss: Deposit Amount' then the receipt on the deposit will result in a currency loss. 

MC: Gain/Loss: Receipt Exch. Date

This is used to calculate the Currency Gain/Loss for each Receipt that is NOT in the 'Home Currency'. This is a non-editable text box to show the date range of the 'Rate' (Exchange Rate) on the 'Exchange Table' the Receipt posted with. This is required for all "Included" Receipts that are not in the 'Home Currency'.

The Date is looked-up from the posted Receipt. This is displayed as: From [Rate From] to [Rate to]. For example, "From 10/01/19 to 10/07/19".


MC: Gain/Loss: Receipt Exch. Rate

This is used to calculate the Currency Gain/Loss for each Receipt that is NOT in the 'Home Currency'. This is a non-editable text box to show the 'Calculation Method' and 'Rate' the Receipt posted with. This is required for all "Included" Receipts that are not in the 'Home Currency'. This is formatted as: [Calculation Method] by [Rate]. For Example, "Multiply by 1.0250" or "Divide by 1.0250".

The Date is looked-up from the posted Receipt.


MC: Gain/Loss: Total

This is used to calculate the Currency Gain/Loss for each Receipt that is NOT in the 'Home Currency'. This is a non-editable text box that is calculated as [Gain/Loss: Deposit Amount] - [Gain/Loss: Receipt Amount]. This is formatted in the Home Currency. 

  • If the 'Gain/Loss Total' = 0 then the 'Receipt' is not included in the Currency Gain/Loss Journal Entry
  • If the 'Gain/Loss Total' > 0 then the 'Receipt' adds this amount to the Currency Gain/Loss Journal Entry as:
    • a 'Debit' that is coded to the Deposit Checkbook's GL Account
    • a 'Credit' that is coded to the Receipt Currency's 'Currency Gain' GL Account
  • If the 'Gain/Loss Total' < 0 then the 'Receipt' adds this amount to the Currency Gain/Loss Journal Entry as: 
    • a 'Debit' that is coded to Receipt Currency's 'Currency Loss' GL Account
    • a 'Credit' that is coded to the Deposit Checkbook's GL Account

Related Topics



Expand
titlePage Definitions

Page Definitions


...