Page Comparison

Insert excerptDef - VendorDef - Vendornopaneltrue The purpose of the Vendor Record View is to enter and edit Vendor records. From here, users can add, edit, remove, and activate/inactivate these records. Software Version: 2021.11.24

Insert excerpt

	Def - Vendor
	Def - Vendor
nopanel	true

The purpose of the Vendor Record View is to enter and edit Vendor records. From here, users can add, edit, remove, and activate/inactivate these records.

Software Version: 2024.09.27 and newer

Table of Contents

type	flat

...

Toolbar Icons

Description

Column Filter Show/Hide

Insert excerpt

	Column Filter Show/Hide - Global
	Column Filter Show/Hide - Global
nopanel	true

Excel

Insert excerpt

	Excel - RV Header 3.0
	Excel - RV Header 3.0
nopanel	true

Group By Show/Hide

Insert excerpt

	Group By Show/Hide - Global
	Group By Show/Hide - Global
nopanel	true

Quick Column Filter

Insert excerpt

	Quick Column Filter
	Quick Column Filter
nopanel	true

Saved Layouts

Insert excerpt

	Column Layouts for Framework 3.0 - Global
	Column Layouts for Framework 3.0 - Global
nopanel	true

Fields

Description

Properties

Insert excerpt

	Properties - RV
	Properties - RV
nopanel	true

Value

Insert excerpt

	Value - RV
	Value - RV
nopanel	true

Group: ID and Descriptions

Vendor ID

Insert excerpt

	Def - Vendor ID
	Def - Vendor ID
nopanel	true

This is a text box that defaults to blank for new records, is required and must be <= 50 characters. If not assigned, the message "Vendor Processing Failed: ([VendorID]): Vendor ID is required." will be displayed on Save. This value must be unique across all AP Vendor, Fishermen, Tender, and Loan accounts. If not unique, the message "Vendor Processing Failed: ([VendorID]): Duplicate Vendor IDs are not allowed." will be displayed on Save. This is always editable, but only in systems that are not integrating Vendors with a third party system. To be editable, the "Vendor" 'Transaction Type on both the 'Inbound to NorthScope' and 'Outbound from NorthScope' Integration Modes must be set to "None" on the Integration Configuration page.

Database Field: ERPx_APVendor.VendorID

Vendor Name

Insert excerpt

	Def - Vendor Name
	Def - Vendor Name
nopanel	true

This is a text box that defaults to blank, is required and must be <=100 characters. If not assigned, the message "Vendor Processing Failed: ([VendorName]): Vendor Name is required." will be displayed on Save. This is always editable.

Database Field: ERPx_APVendor.VendorName

Payment Name

Insert excerpt

	Def - Payment Name
	Def - Payment Name
nopanel	true

This is a text box that defaults to the Vendor Name but is not required. If entered, it must be <=150 characters. This is always editable.

Database Field: ERPx_APVendor.CheckName

Group: Configuration

Vendor Class ID

Insert excerpt

	Def - Vendor Class ID
	Def - Vendor Class ID
nopanel	true

This is a single-select lookup that defaults to blank but is required. If missing, the message "Vendor Processing Failed: ([VendorID]): Vendor Class is required." will be displayed on Save. This field is always editable but changing it will not update any of the default vendor properties or accounts that are assigned on the new Vendor Class.

The lookup contains a blank value, the current assigned value, and a list of all the 'Active' records in the Vendor Class master file.

Database Fields: ERPx_APVendorClass.ClassDescription, ERPx_APVendor.VendorClassSK

Vendor Attribute Class

Insert excerpt

	Def - Attribute Class
	Def - Attribute Class
nopanel	true

This is a single-select lookup that defaults from the Attribute Class assigned to the 'Vendor Class' but is not required, but without it, attribute values cannot be assigned or edited for this account. This is always editable.

The lookup contains a blank value, the current assigned value, and a list of all the 'Attribute Classes' with an 'Attribute Type' of "Vendor Attribute Class".

Database Field: ERPx_APVendor.AttributeClassSK

Payment Terms

Insert excerpt

	Def - Payment Terms
	Def - Payment Terms
nopanel	true

This This is a single-select lookup that defaults from the Payment Terms assigned to the 'Vendor Class'. This is required and is always editable. If missing, the message "Vendor Processing Failed: ([VendorID]): Payment Terms is required." will be displayed on Save.The When a new Vendor record is created, if there is no Payment Terms value set on the Vendor Class and a Payment Terms value is not manually selected, the message "There is no Payment Terms set on the Vendor Class for this Vendor and Payment Terms is required. Please select a value from the Payment Terms property for the Vendor.” will be displayed on Save.

The lookup contains a blank value, the current assigned value, and a list of all the 'ActiveActive' Payment Terms.

Database Fields: ERPx_MFPaymentTerms.PaymentTermName, ERPx_APVendor.PaymentTermSK

Currency

Insert excerpt

	Def - Currency
	Def - Currency
nopanel	true

This is a single-select lookup that defaults from the Currency assigned to the 'Vendor Class'. This is required and is always editableeditable until the Vendor is assigned to a transaction. If missing, the message "Vendor Processing Failed: ([VendorID]): Currency is required." will be displayed on Save. Even though this field is required, it is currently for information only and does not drive any functionality.

The lookup contains a blank value, the current assigned value, and a list of all the 'Active' Company Currencies.

Database Fields: ERPx_MFCurrency.CurrencyID, ERPx_MFDataEntityCompanyCurrency.CurrencySK, ERPx_APVendor.CurrencySK

1099 Type

Insert excerpt

	Def - 1099 Type
	Def - 1099 Type
nopanel	true

This is a single-select lookup to assign the '1099 Type & Box' property for the Vendor. This is required, is always editable, and defaults to "No 1099".

This lookup contains all the values in the ERPx_APTenNinetyNineType table.

Database Field: ERPx_APVendor.TenNinetyNineTypeSK

Vendor Account

Insert excerpt

	Def - Vendor Account
	Def - Vendor Account
nopanel	true

This is text box to assign the account number associated with the Vendor. This defaults to blank and is not required, but if entered, it must be <=25 characters. This is always editable. This is not visible until after the record is initially saved.

Database Field: ERPx_APVendor.VendorAccount

Group: Default Address

1099

Insert excerpt

	Def - Default Address 1099
	Def - Default Address 1099
nopanel	true

This is a single-select lookup to assign the Address ID that contains the address used for 1099s.

This is not editable on new records until they are initially saved. Then, this defaults to 'PRIMARY' but is always editable.

The lookup contains the current assigned value and a list of all the 'Active' vendor Address IDs for the current Vendor.

Database Field: ERPx_APVendorAddress.Is1099Default

Payment

Insert excerpt

	Def - Default Address Payment
	Def - Default Address Payment
nopanel	true

This is a single-select lookup to assign the Address ID that contains the address used for Payments.

This is not editable on new records until they are initially saved. Then, this defaults to 'PRIMARY' but is always editable.

The lookup contains the current assigned value and a list of all the 'Active' vendor Address IDs for the current Vendor.

Database Field: ERPx_APVendorAddress.IsPaymentDefault

Physical

Insert excerpt

	Def - Default Address Physical
	Def - Default Address Physical
nopanel	true

This is a single-select lookup to assign the Address ID that contains the address used for the physical location.

This is not editable on new records until they are initially saved. Then, this defaults to 'PRIMARY' but is always editable.

The lookup contains the current assigned value and a list of all the 'Active' vendor Address IDs for the current Vendor.

Database Field: ERPx_APVendorAddress.IsPhysicalDefault

Group: Tax

Tax ID

Insert excerpt

	Def - Tax ID
	Def - Tax ID
nopanel	true

This is text box to assign the Tax ID associated with the Vendor. This defaults to blank and is not required but if a value is entered it must be <=15 characters. This is always editable.

Database Field: ERPx_APVendor.TaxID

Tax Registration

Insert excerpt

	Def - Tax Registration
	Def - Tax Registration
nopanel	true

This is text box to assign the tax registration number associated with the Vendor. This defaults to blank and is not required but if a value is entered it must be <=25 characters. This is always editable.

Database Field: ERPx_APVendor.TaxRegistration

Group: Other

Hold

Insert excerpt

	Def - On Hold - Vendor
	Def - On Hold - Vendor
nopanel	true

This is a single-select standard lookup to select if the Vendor's account should be placed on hold or not.

The lookup contains the values 'Yes' or 'No' and defaults to 'No'. If set to 'Yes' then new transactions can be entered for the Vendor but payments cannot be issued to them. If set to 'No' then the record is not on hold and can be freely used. This field is always editable.

Database Field: ERPx_APVendor.IsOnHold

Inactive

Insert excerpt

	Def - Inactive
	Def - Inactive
nopanel	true

This is a single-select standard lookup to select if the Vendor's account is active or not.

The lookup contains the values 'Yes' or 'No' and defaults to 'No'. If set to 'Yes' then the record is "Inactive" and will not be included in look-ups for transactions or other master files. If set to 'No' then the record is "Active" and can be freely used. This field is always editable.

Only Vendors with no open transactions/ balances can be set to Inactive, otherwise the message "Vendor Name([VendorID]) has a balance or is on an open transaction and cannot be saved as Inactive" will be displayed. This is not visible until after the record is initially saved.

Database Field: ERPx_APVendor.IsInactive

Addresses Tab

Toolbar Icons

Description

Add Item

Insert excerpt

	Add Item - RV Grid 3.0
	Add Item - RV Grid 3.0
nopanel	true

Column Filter Show/Hide

Insert excerpt

	Column Filter Show/Hide - Global
	Column Filter Show/Hide - Global
nopanel	true

Excel

Insert excerpt

	Excel - RV Header 3.0
	Excel - RV Header 3.0
nopanel	true

Group By Show/Hide

Insert excerpt

	Group By Show/Hide - Global
	Group By Show/Hide - Global
nopanel	true

Quick Column Filter

Insert excerpt

	Quick Column Filter
	Quick Column Filter
nopanel	true

Remove Items

Insert excerpt

	Remove Items - RV Grid 3.0
	Remove Items - RV Grid 3.0
nopanel	true

When attempting to delete a Vendor Fisherman, Fisherman & Tender, and Tender address or Loan address configured for ACH, the message "[Vendor Name]: has an address, [Address ID], that has been used for ACH. Please navigate to the Fisherman ACH configuration page (Fisherman Accounting > Configuration > Fisherman ACH) to remove the record prior to deleting the address record." will be displayed when Remove Items is clicked.

When attempting to delete a Vendor address configured for ACH, the message "[Vendor Name]: Address [Address ID] cannot be deleted because it is configured for ACH" will be displayed when Remove Items is clicked.

When attempting to delete a Vendor Address that is set as default the message "[Vendor Name] [Vendor ID]: Address [AddressID] is the [Default address type] address and cannot be deleted." will be displayed when Remove Items is clicked.

Additionally when attempting to delete a Vendor Address that has been used on a check, the message "[Vendor Name] [Vendor ID]: Address [AddressID] has been used on Checks and cannot be deleted." when Remove Items is clicked.

Saved Layouts

Insert excerpt

	Column Layouts for Framework 3.0 - Global
	Column Layouts for Framework 3.0 - Global
nopanel	true

Fields

Description

Checkbox

Insert excerpt

	Checkbox (Tag)- RV
	Checkbox (Tag)- RV
nopanel	true

Address 1

Insert excerpt

	Def - Address - Address Line 1
	Def - Address - Address Line 1
nopanel	true

This is a text box to assign/edit the 'Address 1' value for the Address ID. This defaults to blank and is not required. If entered, it must be <=75 characters. This is always editable.

Database Field: ERPx_APVendorAddress.AddressLine1

Address 2

Insert excerpt

	Def - Address - Address Line 2
	Def - Address - Address Line 2
nopanel	true

This is a text box to assign/edit the 'Address 2' value for the Address ID. This defaults to blank and is not required. If entered, it must be <=75 characters. This is always editable.

Database Field: ERPx_APVendorAddress.AddressLine2

Address 3

Insert excerpt

	Def - Address - Address Line 3
	Def - Address - Address Line 3
nopanel	true

This is a text box to assign/edit the 'Address 3' value for the Address ID. This defaults to blank and is not required. If entered, it must be <=75 characters. This is always editable.

Database Field: ERPx_APVendorAddress.AddressLine3

Address ID

Insert excerpt

	Def - Vendor Address ID
	Def - Vendor Address ID
nopanel	true

This is a text box to assign/edit the value of the Address ID. This defaults to "Primary" and is required to be unique by Vendor (For example, every Vendor can have an Address ID of REMIT but that ID can only be used once for each Vendor account) and must be <=25 characters. This is always editable.

Database Field: ERPx_APVendorAddress.AddressID

City

Insert excerpt

	Def - Address - City
	Def - Address - City
nopanel	true

This is a text box to assign/edit the 'City' value for the Address ID. This defaults to blank and is not required. If entered, it must be <=25 characters. This is always editable.

Database Field: ERPx_APVendorAddress.City

Country

Insert excerpt

	Def - Address - Country
	Def - Address - Country
nopanel	true

This is a text box to assign/edit the 'Country' value for the Address ID. This defaults to blank and is not required. If entered, it must be <=50 characters. This is always editable.

Database Field: ERPx_APVendorAddress.Country

Default - 1099

Insert excerpt

	Def - 1099 Type
	Def - 1099 Type
nopanel	true

This is a non-editable text box that displays as "Yes" for the Address ID assigned as the default '1099' Address ID on the Properties tab of the Vendor Record View, all other Address IDs within a Vendor will have a blank value. This field is never editable from here, but is set from the 1099 default address field on the Properties tab of the Vendor Record View or from the Mass Update on the Vendor Addresses list view.

Database Field: ERPx_APVendorAddress.Is1099Default

Default - Payment

Insert excerpt

	Def - 1099 Type
	Def - 1099 Type
nopanel	true

This is a non-editable text box that displays as "Yes" for the Address ID assigned as the default 'Payment' Address ID on the Properties tab of the Vendor Record View, all other Address IDs within a Vendor will have a blank value. This field is never editable from here, but is set from the Payment default address field on the Properties tab of the Vendor Record View or from the Mass Update on the Vendor Addresses list view.

Database Field: ERPx_APVendorAddress.IsPaymentDefault

Default - Physical

Insert excerpt

	Def - 1099 Type
	Def - 1099 Type
nopanel	true

This is a non-editable text box that displays as "Yes" for the Address ID assigned as the default 'Physical' Address ID on the Properties tab of the Vendor Record View, all other Address IDs within a Vendor will have a blank value. This field is never editable from here, but is set from the Physical default address field on the Properties tab of the Vendor Record View or from the Mass Update on the Vendor Addresses list view.

ERPx_APVendorAddress.IsPhysicalDefault

Default Payment Type

A single-select standard lookup to assign the default payment type for the corresponding address. The lookup contains the values "ACH" or , "Check", "Draft", and "Wire" and defaults to "Check". If set toCheck, a physical check will can be printed when payments are processed for this Vendor, using this address. If set to ACH, an ACH record will be created as part of an ACH batch when payments are processed for this Vendor, using this address. To change from Check to ACH, the Address ID If set to Draft or Wire a remittance can be printed when payments are processed for this Vendor, using this address.

To change the payment type to ACH, the Address ID must be configured for ACH in the Vendor ACH list view, otherwise the message "Vendor Name (VendorID): Address ID [AddressID]: The Default Payment Type cannot be changed to ACH because the address has not been configured for ACH. Go to Purchasing > Configuration > Vendor ACH to configure this Address." will be displayed.

This field is required.

Database FieldFields: ERPx_MFModuleTransaction.TransactionName, ERPx_APVendorAddress.DefaultPaymentTypeSK

Email

Insert excerpt

	Def - Address - Email
	Def - Address - Email
nopanel	true

This is a text box to assign/edit the 'email' value for the Address ID. This defaults to blank and is not required. If entered, it must be <=1,000 characters. This is always editable.

Database Field: ERPx_APVendorAddress.Email

Payment Description

An editable text box to enter the value that will display on the memo line of manual payments for the corresponding Address ID. This field is not required but if a value is entered it must be <=250 characters. This is always editable.

Database Field: ERPx_APVendorAddress.CheckDescription

Payment Name

Insert excerpt

	Def - Payment Name
	Def - Payment Name
nopanel	true

This is a text box to assign/edit the value for the Payment Name that will be displayed on payments made to the vendor. This defaults from the Vendor Name entered on the Properties tab, but can be overwritten and must be <=150 characters. This is not required but without it the Payment Name field on the Properties tab will be used as the Payee on a printed check or ACH payment, but if both this field and the Payment Name on the Properties tab is blank then the Vendor Name will be used. This is always editable.

Database Field: ERPx_APVendorAddress.CheckName

Phone

Insert excerpt

	Def - Address - Phone 1
	Def - Address - Phone 1
nopanel	true

This is a text box to assign/edit the 'Phone' value for the Address ID. This defaults to blank and is not required. If entered, it must be <=25 characters. This is always editable.

Database Field: ERPx_APVendorAddress.Phone1

State

Insert excerpt

	Def - Address - State
	Def - Address - State
nopanel	true

This is a text box to assign/edit the 'State' value for the Address ID. This defaults to blank and is not required. If entered, it must be <=30 characters. This is always editable.

Database Field: ERPx_APVendorAddress.State

Zip

Insert excerpt

	Def - Address - Zip
	Def - Address - Zip
nopanel	true

This is a text box to assign/edit the 'Zip' value for the Address ID. This defaults to blank and is not required. If entered, it must be <=15 characters. This is always editable.

Database Field: ERPx_APVendorAddress.Zip

...

Toolbar Icons

Description

Column Filter Show/Hide

Insert excerpt

	Column Filter Show/Hide - Global
	Column Filter Show/Hide - Global
nopanel	true

Excel

Insert excerpt

	Excel - RV Header 3.0
	Excel - RV Header 3.0
nopanel	true

Group By Show/Hide

Insert excerpt

	Group By Show/Hide - Global
	Group By Show/Hide - Global
nopanel	true

Quick Column Filter

Insert excerpt

	Quick Column Filter
	Quick Column Filter
nopanel	true

Saved Layouts

Insert excerpt

	Column Layouts for Framework 3.0 - Global
	Column Layouts for Framework 3.0 - Global
nopanel	true

Fields

Description

Contact Type

Insert excerpt

	Def - Contact - Type
	Def - Contact - Type
nopanel	true

This is a non-editable text box to display which department or classification the contact belongs to. Additional Contact Types can only be added by NorthScope support.

Database Field: ERPx_APVendorContact.ContactTypeSK

Email

Insert excerpt

	Def - Contact - Email
	Def - Contact - Email
nopanel	true

This is a text box to assign/edit the value for the Contact. This defaults to blank and is not required. If entered, it must be <=1,000 characters. This is always editable.

Database Field: ERPx_APVendorContact.Email

Fax

Insert excerpt

	Def - Contact - Fax
	Def - Contact - Fax
nopanel	true

This is a text box to assign/edit the value for the Contact. This defaults to blank and is not required. If entered, it must be <=25 characters. This is always editable.

Database Field: ERPx_APVendorContact.Fax

Name

Insert excerpt

	Def - Contact - Name
	Def - Contact - Name
nopanel	true

This is a text box to assign/edit the value for the Contact. This defaults to blank and is not required. If entered, it must be <=100 characters. This is always editable.

Database Field: ERPx_APVendorContact.Name

Note

Insert excerpt

	Def - Contact - Note
	Def - Contact - Note
nopanel	true

This is a text box to assign/edit the value for the Contact. This defaults to blank and is not required. If entered, it must be <=500 characters. This is always editable.

Database Field: ERPx_APVendorContact.Note

Phone

Insert excerpt

	Def - Contact - Phone 1
	Def - Contact - Phone 1
nopanel	true

This is a text box to assign/edit the value for the Contact. This defaults to blank and is not required. If entered, it must be <=25 characters. This is always editable.

Database Field: ERPx_APVendorContact.Phone

Attributes Tab

Toolbar Icons

Description

Column Filter Show/Hide

Insert excerpt

	Column Filter Show/Hide - Global
	Column Filter Show/Hide - Global
nopanel	true

Excel

Insert excerpt

	Excel - RV Header 3.0
	Excel - RV Header 3.0
nopanel	true

Group By Show/Hide

Insert excerpt

	Group By Show/Hide - Global
	Group By Show/Hide - Global
nopanel	true

Saved Layouts

Insert excerpt

	Column Layouts for Framework 3.0 - Global
	Column Layouts for Framework 3.0 - Global
nopanel	true

Fields

Description

Attribute

Insert excerpt

	Attribute - Attribute
	Attribute - Attribute
nopanel	true

The Attributes displayed here are setup and assigned in the Attributes section of the Company module (Company → Setup → Attributes → Vendors).

Required

A non editable text box that shows whether the Attribute Value is required or not. If the Attribute Value is required, it will display "Yes". If it is optional, it will display as blank. This value is only editable from the 'Assign Attribute Rules' page (Company → Setup → Attributes → Vendors → Vendor Attribute Class hyperlink).

Value

Insert excerpt

	Attribute - Value
	Attribute - Value
nopanel	true

Vendor Items Tab

Toolbar Icons

Description

Add Item

Insert excerpt

	Add Item - RV Grid 3.0
	Add Item - RV Grid 3.0
nopanel	true

Column Filter Show/Hide

Insert excerpt

	Column Filter Show/Hide - Global
	Column Filter Show/Hide - Global
nopanel	true

Excel

Insert excerpt

	Excel - RV Header 3.0
	Excel - RV Header 3.0
nopanel	true

Group By Show/Hide

Insert excerpt

	Group By Show/Hide - Global
	Group By Show/Hide - Global
nopanel	true

Quick Column Filter

Insert excerpt

	Quick Column Filter
	Quick Column Filter
nopanel	true

Remove Items

Insert excerpt

	Remove Items - RV Grid 3.0
	Remove Items - RV Grid 3.0
nopanel	true

Saved Layouts

Insert excerpt

	Column Layouts for Framework 3.0 - Global
	Column Layouts for Framework 3.0 - Global
nopanel	true

Fields

Description

Created

Insert excerpt

	Created
	Created
nopanel	true

Database Field: ERPx_APVendorItem.Created

Created By

Insert excerpt

	Created By
	Created By
nopanel	true

Database Field: ERPx_APVendorItem.CreatedBy

Item

Insert excerpt

	Item ID & Item Description
	Item ID & Item Description
nopanel	true

This is a text box that is required. It defaults as blank and is not editable once the line item has been saved to the transaction.

When the 'Add Item' icon is clicked, users may enter all or part of an Item ID or Description and hit the Enter key on the keyboard. If a complete Item ID was entered, the line item will be saved, if not, the Item Lookup dialog box will open with a list of items containing the data entered. From the Item Lookup dialog box, users may check the checkbox next to one or multiple item(s) to add to the transaction using the Save & Close button.

From the Item Lookup page, if a user selects an Item(s) that has not got a Default Purchasing UOM setup on the Item master file record, the message "Item ID: Item Description: Cannot be added as a Vendor Item because it does not have a Default Purchasing UOM." will be displayed on Save. Users can deselect this item to continue adding items via the lookup.

Items must be unique by Item, UOM and Vendor, so the same item can be added with a different UOM if needed. If a user tries to add an item that already exists with the same UOM, the message "The Same Item and UOM already exists." will be displayed on Save.

Insert excerpt

	Def - Item
	Def - Item
nopanel	true

Database Fields: ERPx_IMItem.ItemID:ItemDescription, ERPx_APVendorItem.ItemSK

Last Paid Date

Displays the last date the corresponding item was invoiced for the Vendor. This is a non-editable date field that is not required. This value updates when AP Invoices are Posted for the Vendor and the Item and UOM on the AP Invoice matches the Item and UOM setup on the Vendor Items for the Vendor. If the item has never been invoiced this field will be blank.

This field is not stored in the database.

Last Paid Price

Displays the last Price that was paid for the corresponding item that was invoiced for the Vendor. This is a non-editable numeric text box that is not required. This value updates when AP Invoices are Posted for the Vendor and the Item and UOM on the AP Invoice matches the Item and UOM setup on the Vendor Items for the Vendor. If the item has never been invoiced this field will be blank.

This field is not stored in the database.

Last Paid Qty

Displays the last quantity of the corresponding item that was invoiced for the Vendor. This is a non-editable numeric text box that is not required. This value updates when AP Invoices are Posted for the Vendor and the Item and UOM on the AP Invoice matches the Item and UOM setup on the Vendor Items for the Vendor. If the item has never been invoiced this field will be blank.

This field is not stored in the database.

Last Updated

Insert excerpt

	Last Updated
	Last Updated
nopanel	true

Database Field: ERPx_APVendorItem.LastUpdated

Last Updated By

Insert excerpt

	Last Updated By
	Last Updated By
nopanel	true

Database Field: ERPx_APVendorItem.LastUser

Line Comment

Insert excerpt

	Line Item Comment
	Line Item Comment
nopanel	true

This is an editable text box that is not required. If a value is entered it must be <= 200 characters and will default on the Find Vendor Items page which is used to add the Vendor Items to a Purchase Order or Invoice record. This is always editable.

Database Field: ERPx_APVendorItem.LineComment

PO Min. Order Qty

Displays the minimum quantity that should be ordered for the item. For example, a Vendor may require an item to be ordered in a minimum of 50 cases and in multiples of 10 cases. This is a numeric text box that defaults to 0.00 that is not required. If entered, the value must be >= and divisible by the PO Order Multiple Of value (if a value is entered), else the messages "[Vendor Name] (Vendor ID): " Item ID: Item Description: The PO Minimum Order Quantity must be greater than or equal to the PO Order Multiple Of." and "[Vendor Name] (Vendor ID): " Item ID: Item Description: The PO Minimum Order Quantity value entered is not divisible by the PO Order Multiple Of specified." will be displayed on Save. This value is always editable.

Database Field: ERPx_APVendorItem.POMinOrderQty

PO Order Multiple Of

Displays the multiple of quantity that the item should be ordered in. For example, a Vendor may require an item to be ordered in multiples of 10 cases. This is a numeric text box that defaults to 0.00 that is not required. If entered, this value must be >= zero, else the message "[Vendor Name] (Vendor ID): " Item ID: Item Description: Negative PO Order Multiple Of is not allowed." will be displayed on Save. This is always editable.

Database Field: ERPx_APVendorItem.POOrderMultiple

Price

Insert excerpt

	Price
	Price
nopanel	true

This is a numeric text box that is not required. It defaults to zero and will display the number of decimals setup on the corresponding Item's Price Decimals. If a value is entered it will default on the Find Vendor Items page which is used to add the Vendor Items to a Purchase Order or Invoice record. This is always editable.

Database Field: ERPx_APVendorItem.Price

Seq.

Insert excerpt

	Seq.
	Seq.
nopanel	true

This is an editable text box that defaults to the next available base-10 number. It is required, and is always editable. To re-sequence the line items, edit one or more lines with a new positive number that would put the line item where you want it sorted, and click the Save button. On save, the line items will be resorted, and the Ln. values will be re-set to base-10 values.

For example, if you had line items 10, 20, and 30 and you wanted the last one (Ln. 30) to be second, you could edit the value to any number between 10 and 20 (i.e. 15) and on save the lines would be sorted in the new sequence (10, 15, and 30) and then all Ln.'s would be re-set to base 10 numbers (10, 20, 30).

Database Field: ERPx_APVendorItem.LineItemSort

UOM

Insert excerpt

	UOM - Price
	UOM - Price
nopanel	true

This is a single select lookup that defaults from the 'Purchases' Default UOM on the Item master file record if one is entered, else it is blank to select a value. If a value is not selected the message "[Vendor Name] (Vendor ID): " Item ID: Item Description: A UOM is required to add a Vendor Item." will be displayed on Save. The lookup contains a list of all the active UOM's setup on the Item's UOM schedule.

Database Fields: ERPx_IMUOM.UOMID, ERPx_APVendorItem.PriceUOMSK

Vendor Item Description

Displays the description of the Vendor Item. This is an editable text box that is not required. If a value is entered it must be <= 200 characters and will default on the Find Vendor Items page which is used to add the Vendor Items to a Purchase Order or Invoice record. This is always editable.

Database Field: ERPx_APVendorItem.VendorItem

GL Accounts Tab

Toolbar Icons

Description

Column Filter Show/Hide

Insert excerpt

	Column Filter Show/Hide - Global
	Column Filter Show/Hide - Global
nopanel	true

Excel

Insert excerpt

	Excel - RV Header 3.0
	Excel - RV Header 3.0
nopanel	true

Group By Show/Hide

Insert excerpt

	Group By Show/Hide - Global
	Group By Show/Hide - Global
nopanel	true

Saved Layouts

Insert excerpt

	Column Layouts for Framework 3.0 - Global
	Column Layouts for Framework 3.0 - Global
nopanel	true

Fields

Description

Account Type

This field contains the following account types:

Accounts Payable:

Insert excerpt

	Def - GL Account - Accounts Payable
	Def - GL Account - Accounts Payable
nopanel	true

The 'Account' lookup for this 'Account Type' is a single-select load on demand lookup that contains a blank value, the current assigned value, and all the 'Active' GL Accounts. This Account is not editable on transactions.

Purchases:

Insert excerpt

	Def - GL Account - Purchases
	Def - GL Account - Purchases
nopanel	true

The 'Account' lookup for this 'Account Type' is a single-select load on demand lookup that contains a blank value, the current assigned value, and all the 'Active' GL Accounts. This Account is editable on transactions.

Terms Discount Taken:

Insert excerpt

	Def - GL Account - Terms Discount Taken
	Def - GL Account - Terms Discount Taken
nopanel	true

The 'Account' lookup for this 'Account Type' is a single-select load on demand lookup that contains a blank value, the current assigned value, and all the 'Active' GL Accounts. This Account is not editable on transactions.

Write Off:

Insert excerpt

	Def - GL Account - Write Off
	Def - GL Account - Write Off
nopanel	true

The 'Account' lookup for this 'Account Type' is a single-select load on demand lookup that contains a blank value, the current assigned value, and all the 'Active' GL Accounts. This Account is editable when applying payments.

Account

A single-select load on demand lookup to assign the GL Account. This defaults from the value assigned on the Vendor Class and is not required to save the master file record but may be required to post a transaction. This is always editable.

The lookup contains a blank value, the current assigned value, and all the 'Active' GL Accounts.

Versions Compared

Old Version 33

New Version Current

Key

Addresses Tab

Attributes Tab

Vendor Items Tab

GL Accounts Tab

Related Topics

Page Definitions